Produce a colorful shower of lights by tossing a number of LED magnets. These magnets are super easy to make, so despite the fact that the lights don't last forever, they are simple to replace. Make use of your LED magnets to include instant color for your refrigerator or other magnetic surface. Here's steps to make them:
1
Place among the LEDs onto among the batteries. The lengthy "leg" from the LED (the anode) continues the positive side from the battery. The short "leg" (the cathode) continues the gloomy.|
SMD 335 LED Strip 2
Touch the legs from the LED towards the battery devices. When the light occurs, you already know it's working.
3
Tape battery towards the legs from the LED while using strapping tape. Tightly wrap the tape round the battery and also the legs.
4
Put among the magnets around the positive side from the battery when you are wrapping the tape around. Continue wrapping before the magnet and battery are completely guaranteed towards the LED.|
SMD 335 300 LEDs LED Strip 5
Repeat Steps 1 through 4 to create the relaxation of the LED magnets.
6
Throw your LEDs onto a magnetized surface to produce a random pattern. Or place them right into a creative design. Your LED lights should last a few days, possibly per week or maybe more.|
SMD 5050 LED Strip LightTips & Alerts
In case your LED flickers you already know the tape isn't wrapped tightly enough.
When the cathode from the LED touches the positive side from the battery, it won't work correctly. So, make certain the cathode touches the negative terminal only.
Don't pull around the LED once the magnet is mounted on something. Slide them back rather. If required, make use of a tool like a screwdriver to lightly pry up.